{"title":"Best Sellers","description":"\u003cp\u003eThe parts makers order most — our flagship CNC dust boots, hardwood zero clearance inserts, acrylic router base plates and dust collection upgrades. All designed, machined and shipped from our shop in Lafayette, Indiana.\u003c\/p\u003e","products":[{"product_id":"dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs","title":"CNC Dust Boot v4 — 59mm to 108mm | Magnetic, Tool-Change Ready | P2P","description":"\u003cp\u003e\u003cstrong\u003eYour CNC deserves a dust boot that actually stays put.\u003c\/strong\u003e The P2P Dust Boot v4 is engineered from the ground up for real-world CNC use — no mid-job dislodging, no fumbling for tool changes, no adapter drama. Just clean cuts and a clean shop.\u003c\/p\u003e\n\n\u003ch3\u003e📦 What's Included — Yes, the Brush Comes With It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003eDust boot body\u003c\/strong\u003e — screw-clamp spindle mount, assembled and ready to install\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eBrush skirt, already fitted to the boot\u003c\/strong\u003e — 3\" USA-made nylon, full-ring style\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eHose adapter in your size\u003c\/strong\u003e — tell us your hose at checkout, no extra charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou do not need to buy a brush separately.\u003c\/strong\u003e Every v4 ships with a full brush installed and ready to cut. The brushes listed in our store are optional spares — or a \u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003esplit-style skirt\u003c\/a\u003e if you'd rather run that.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy makers choose the Pixels to Prototype v4:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔩 Screw clamp mount\u003c\/strong\u003e — locks firmly to your spindle with zero wobble, even on aggressive passes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic brush + anti-dislodge tabs\u003c\/strong\u003e — stays put when things get hairy, snaps off in seconds when you need it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Brush included\u003c\/strong\u003e — 3\" USA-made nylon, trim it to any length with scissors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔀 Split-skirt compatible\u003c\/strong\u003e — ships with the full brush; drop in a split skirt to flip open for tool changes without removing the boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Quick-connect hose adapter\u003c\/strong\u003e — disconnect your dust hose in seconds; default is 4\" but adapters for all sizes available at no extra cost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎨 Multiple colors\u003c\/strong\u003e — default black; contact us for custom requests\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e X-Carve, Onefinity, Shapeoko, Sienci LongMill \u0026amp; AltMill, OpenBuilds, Workbee, Lead CNC, Stepcraft (incl. Q404), EZ Router, DIY builds — and most CNCs in between. Have a weird machine? Reach out. We've made custom boots for dozens of setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose adapters included\u003c\/strong\u003e — just tell us your hose size at checkout. Available in 1.25\" OD, 1.5\" ID, 1.75\" OD, 2.25\" OD, 2.5\" OD, 3\" OD, and custom.\u003c\/p\u003e\n\u003cp\u003e⚠️ The 3\" brush may need trimming for shorter tooling. We recommend keeping a spare so you've always got a long and a short option ready.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMade by CNC makers, for CNC makers — in small batches, with real attention to detail.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e📐 Which Size Do I Need?\u003c\/h3\u003e\n\u003cp\u003eThe size refers to the \u003cstrong\u003eouter diameter of your router or spindle body\u003c\/strong\u003e — not the collet, not the bit, not the collet nut. Measure around the cylindrical body of the motor itself. Here's a quick reference for the most common machines:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eRouter \/ Spindle\u003c\/th\u003e\n\u003cth\u003eCommon Machines\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e59mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXCarve Pro router\u003c\/td\u003e\n\u003ctd\u003eX-Carve Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e62mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVarious compact spindles\u003c\/td\u003e\n\u003ctd\u003eDIY builds, some imported spindles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e65mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMakita RT0701 \/ RT0700, Carbide3D router\u003c\/td\u003e\n\u003ctd\u003eShapeoko, Nomad, Sienci LongMill (stock router), many DIY CNCs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e70mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeWalt DWP611\u003c\/td\u003e\n\u003ctd\u003eX-Carve (original), OpenBuilds, Workbee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e75mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVarious mid-size spindles\u003c\/td\u003e\n\u003ctd\u003eDIY builds, Stepcraft, EZ Router\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e76mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom SCV44 (older models)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC (pre-S series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e80mm Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMost 800W–2.2kW water\/air-cooled spindles\u003c\/td\u003e\n\u003ctd\u003eOnefinity (standard spindle), Lead CNC, many DIY builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e80mm Sienci LongMill\/AltMill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80mm spindle on a Sienci Labs machine\u003c\/td\u003e\n\u003ctd\u003eSienci LongMill MK2 \/ MK2.5 with 80mm spindle upgrade, AltMill \/ AltMill MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e80mm Extended\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80mm spindle with a cooling shroud or bulky mount\u003c\/td\u003e\n\u003ctd\u003eLarger-format and production CNCs — hose port sits further out so the hose clears the shroud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e82mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSome 2.2kW spindles, select imports\u003c\/td\u003e\n\u003ctd\u003eDIY builds — measure to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e85mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom SCV44 (S series \u0026amp; newer)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC S series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e88.9mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBosch 1617 \/ 1617EVS \/ 1618 series\u003c\/td\u003e\n\u003ctd\u003eOpenBuilds, custom router tables, DIY CNCs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e90mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom S series (select configs)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC S series — verify your model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e100mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLarge format spindles (3kW+)\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty DIY and industrial builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e108mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorter Cable 7518 (4.25\" motor body)\u003c\/td\u003e\n\u003ctd\u003eStepcraft Q404 with Porter Cable 7518, router tables, heavy-duty DIY CNC builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow to measure:\u003c\/strong\u003e Wrap a soft tape measure or a piece of string around the widest part of your spindle body (not the mount, not the collet nut). That circumference divided by π (3.14159) gives you the diameter. Round to the nearest size above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree 80mm options — which one?\u003c\/strong\u003e All three clamp the same 80mm spindle body; the difference is everything \u003cem\u003earound\u003c\/em\u003e it. Pick \u003cstrong\u003e80mm Standard\u003c\/strong\u003e for a bare spindle. Pick \u003cstrong\u003e80mm Sienci LongMill\/AltMill\u003c\/strong\u003e if you're on a Sienci machine with an 80mm spindle. Pick \u003cstrong\u003e80mm Extended\u003c\/strong\u003e if your spindle wears a cooling shroud or your mount crowds the hose port — the extended version pushes the hose connection further out so nothing collides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStill not sure?\u003c\/strong\u003e Drop your router or spindle model in the contact form or send us a message — we'll point you to the right size in minutes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e🛒 Complete Your Setup\u003c\/h3\u003e\n\u003cp\u003eOptional extras — your boot already arrives complete. These are what most customers add over time:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhy You Need It\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eSpare Brush — Full or Split\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOptional spare (one already comes on your boot). Also how you switch to the split style.\u003c\/td\u003e\n\u003ctd\u003e$27.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-brush-by-the-foot\"\u003eBrush by the Foot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA-made nylon bristle, 0.5mm or 0.25mm. Cut to any length.\u003c\/td\u003e\n\u003ctd\u003efrom $10.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark\"\u003eBrush Spacers — ½\" \u0026amp; 1\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDrop the skirt lower for long tooling and deep cuts.\u003c\/td\u003e\n\u003ctd\u003e$22.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-shoe-adapters-for-pixels-to-prototype-dust-boot\"\u003eHose Adapters — 1.25\" to 4\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExtra sizes beyond the one included with your boot.\u003c\/td\u003e\n\u003ctd\u003efrom $7.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector\"\u003eDust Hose Support Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOverhead EMT mount keeps a 4\" hose out of the cut.\u003c\/td\u003e\n\u003ctd\u003e$46.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eIs the brush included with the dust boot?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes. Every P2P dust boot ships with a 3\" USA-made nylon brush skirt already installed on it — you do not buy the brush separately. The brushes listed in our store are optional spares and replacements for when yours wears down or gets trimmed too short.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat's the difference between a full brush and a split brush?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eA \u003cstrong\u003efull\u003c\/strong\u003e brush is one continuous ring of bristles — the best seal and the strongest suction, ideal for long runs on a single bit. A \u003cstrong\u003esplit\u003c\/strong\u003e brush is that same ring divided into two halves, so you can open it and reach the bit without pulling the skirt off the boot — handy if you change tools constantly. The v4 ships with the full brush; a split skirt is available separately and drops straight onto the same magnets.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDo I need to buy a hose adapter too?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eNo. One adapter in your hose size is included at no extra cost — just tell us your size at checkout. The adapters listed separately are for running a second hose size or replacing a lost one.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Pixels to Prototype","offers":[{"title":"59mm XCarve Pro","offer_id":48751857926440,"sku":"DB4-59MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"62mm","offer_id":49643298062632,"sku":"DB4-62MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"65mm Makita\/Spindle","offer_id":48751857991976,"sku":"DB4-65MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"70mm DeWalt 611","offer_id":48751858057512,"sku":"DB4-70MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"75mm Spindle","offer_id":48751858123048,"sku":"DB4-75MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"76mm Old SCV44","offer_id":48751858450728,"sku":"DB4-76MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"80mm Standard","offer_id":48751858188584,"sku":"DB4-80MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"80mm Sienci LongMill\/AltMill","offer_id":52184572756264,"sku":"DB4-80MM-SNC","price":124.99,"currency_code":"USD","in_stock":true},{"title":"80mm Extended","offer_id":52184572789032,"sku":"DB4-80MM-EXT","price":124.99,"currency_code":"USD","in_stock":true},{"title":"82mm","offer_id":50491921596712,"sku":"DB4-82MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"85mm SCV44 and S Ser","offer_id":48751858516264,"sku":"DB4-85MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"88.9mm Bosch 1617EVS","offer_id":48751858254120,"sku":"DB4-89MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"90mm Phantom S Ser.","offer_id":48751858319656,"sku":"DB4-90MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"100mm Spindle","offer_id":48751858385192,"sku":"DB4-100MM","price":124.99,"currency_code":"USD","in_stock":true},{"title":"106.5mm Porter Cable 7518","offer_id":52083988594984,"sku":"DB4-106.5MM","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.5141542649_e3oz.jpg?v=1718624455"},{"product_id":"dewalt-table-saw-4-dust-adapter-dustright-dwe7491","title":"DeWalt DWE7491 Table Saw Dust Adapter — 4\" Hose \u0026 DustRight | Dust Collection Upgrade","description":"\u003cp\u003e\u003cstrong\u003eThe OEM dust port on DeWalt DWE7491 table saws is undersized and awkward.\u003c\/strong\u003e This adapter finally lets you run a proper 4\" dust collector hose — or your Rockler DustRight system — with a clean, secure connection that doesn't require duct tape or hacks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy this adapter is a must-have:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 Full 4\" dust collector flow\u003c\/strong\u003e — stop fighting restricted OEM ports; get real chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Two adapter options\u003c\/strong\u003e — standard 4\" hose OR DustRight flex hose connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🛠️ Direct fit\u003c\/strong\u003e — mounts to the existing OEM dust port location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚡ Seconds to install\u003c\/strong\u003e — no modifications, no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible saws:\u003c\/strong\u003e DeWalt DWE7491 · DWE7491RS · DWE7485 series\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your connection:\u003c\/strong\u003e\u003cbr\u003e\n• \u003cstrong\u003e4\" Dust Hose\u003c\/strong\u003e — standard 4\" dust collector hose (most common)\u003cbr\u003e\n• \u003cstrong\u003eDustRight Adapter\u003c\/strong\u003e — for Rockler DustRight flex hose systems\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOne of the easiest and most impactful upgrades you can make to your table saw setup.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"4inch Dust Hose","offer_id":48751864447272,"sku":"DA-DWE7491-4IN","price":7.5,"currency_code":"USD","in_stock":true},{"title":"Dust Right Adapter","offer_id":48751864480040,"sku":"DA-DWE7491-DR","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/DeWalt_DWE7491_Dust_Hose_Adapter.jpg?v=1767388014"},{"product_id":"dewalt-table-saw-dwe7491-zero-clearance-insert-multiple-hardwood-options-pixels-to-prototype","title":"DeWalt DWE7491 Table Saw Zero Clearance Insert — Hardwood | Walnut, Cherry \u0026 More","description":"\u003cp\u003e\u003cstrong\u003ePlastic throat plates tear up your workpiece. Hardwood zero clearance inserts don't.\u003c\/strong\u003e This drop-in replacement for the DeWalt DWE7491 closes the gap around your blade so the wood fibers are supported right to the cut edge — no tearout, no splintering, just clean rips every time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy woodworkers upgrade to hardwood inserts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 Zero tearout\u003c\/strong\u003e — blade-to-insert gap is eliminated, so wood fibers can't curl or break at the cut line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🪵 Real hardwood\u003c\/strong\u003e — Walnut, Cherry, or Ash\/Maple\/Oak; it's flat, stable, and looks great in your saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Kerf cut on your saw\u003c\/strong\u003e — your blade cuts the slot, so the fit is perfect for your exact setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔁 Made to order\u003c\/strong\u003e — fresh and flat when it arrives, not sitting in a warehouse warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible saws:\u003c\/strong\u003e DeWalt DWE7491 · DWE7491RS · DWE7492 · DWE7480 · DWE7499 · DWE790X\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWood options:\u003c\/strong\u003e\u003cbr\u003e\n🟤 \u003cstrong\u003eWalnut\u003c\/strong\u003e — rich dark grain, very popular\u003cbr\u003e\n🍒 \u003cstrong\u003eCherry\u003c\/strong\u003e — warm reddish-brown tone\u003cbr\u003e\n🌿 \u003cstrong\u003eAsh \/ Maple \/ Oak\u003c\/strong\u003e — tight grain, light color, extremely hard-wearing\u003c\/p\u003e\n\n\u003cp\u003e💡 Order two — one for your standard blade, one for your dado stack. You'll use both constantly once you go zero clearance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eHandcrafted in small batches. Flat, precise, and ready to install when it arrives.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e✂️ Want to Cut Your Own?\u003c\/h3\u003e\n\u003cp\u003eIf you have a CNC, laser cutter, or makerspace access, grab the design files and cut as many as you want for a few dollars in material:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-table-saw-dwe7491-zero-clearance-insert-digital-design-dxf-f3d-skp-step-pixels-to-prototype-fast-download\"\u003eDWE7491 Zero Clearance Insert Design Files\u003c\/a\u003e\u003c\/strong\u003e — DXF, F3D, SKP, STEP | Instant Download — $4.50\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🪚 Also Running a Miter Saw?\u003c\/h3\u003e\n\u003cp\u003eZero clearance inserts make as much difference on a miter saw as a table saw — maybe more, since every miter cut goes right through the kerf plate. Here's what we make for the most popular miter saws:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInsert\u003c\/th\u003e\n\u003cth\u003eCompatible Saws\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws779-miter-saw-zero-clearance-insert-pixels-to-prototype-woodworking-dhs790t2-dhs790at2-dhs790at2-dhs790ab-type-20-type-22\"\u003eDeWalt DWS779 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS779 — Standard, Type 20 \u0026amp; Type 22\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws780-miter-saw-zero-clearance-insert-pixels-to-prototype\"\u003eDeWalt DWS780 \/ DWS779 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS780 \u0026amp; DWS779 — Walnut, Cherry, Ash\/Maple\/Oak\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dw715-miter-saw-zero-clearance-insert-pixels-to-prototype-woodworking-dw703-dw704-dw705-dw706-dw716\"\u003eDeWalt DW715 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDW715, DW703, DW704, DW705, DW706, DW716\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws715-miter-saw-zero-clearance-insert-hardwood\"\u003eDeWalt DWS715 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS715 12\" single-bevel miter saw\u003c\/td\u003e\n\u003ctd\u003efrom $28.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dcs781-zero-clearance-insert\"\u003eDeWalt DCS781 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDCS781 cordless miter saw\u003c\/td\u003e\n\u003ctd\u003efrom $24.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/zero-clearance-insert-for-kobalt-10-miter-saw-sm2516lw-pixels-to-prototype-multiple-hardwood-options\"\u003eKobalt SM2516LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM2516LW 10\" miter saw — Lowe's Item #857241\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/kobalt-sm2518lw-miter-saw-zero-clearance-insert-hardwood\"\u003eKobalt SM2518LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM2518LW 10\" sliding miter saw — Lowe's Item #5034336\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/kobalt-sm3017lw-miter-saw-zero-clearance-insert-hardwood\"\u003eKobalt SM3017LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM3017LW 12\" sliding miter saw — Lowe's Item #1413795\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/makita-ls1019-zero-clearance-insert-pixels-to-prototype-multiple-wood-options\"\u003eMakita LS1019 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMakita LS1019 dual-bevel sliding miter saw\u003c\/td\u003e\n\u003ctd\u003efrom $27.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e👉 \u003cstrong\u003e\u003ca href=\"\/blogs\/makers-journal\/what-is-a-zero-clearance-insert\"\u003eRead: Why Every Woodworker Needs a Zero Clearance Insert →\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"Walnut \/ None","offer_id":48751865495848,"sku":"ZCI-DWE7491-WAL","price":29.75,"currency_code":"USD","in_stock":true},{"title":"Cherry \/ None","offer_id":48751865528616,"sku":"ZCI-DWE7491-CHY","price":29.75,"currency_code":"USD","in_stock":true},{"title":"Light-Ash\/Maple\/Oak \/ None","offer_id":48751865561384,"sku":"ZCI-DWE7491-ASH","price":27.75,"currency_code":"USD","in_stock":true},{"title":"Walnut \/ Add Custom Text +$8","offer_id":52327630242088,"sku":"ZCI-DWE7491-WAL-ENG","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Cherry \/ Add Custom Text +$8","offer_id":52327630274856,"sku":"ZCI-DWE7491-CHY-ENG","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Light-Ash\/Maple\/Oak \/ Add Custom Text +$8","offer_id":52327630307624,"sku":"ZCI-DWE7491-ASH-ENG","price":35.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/DeWaltTableSawZeroClearance01.jpg?v=1767388829"},{"product_id":"xcarve-pro-dust-boot-pixels-to-prototype-59mm","title":"XCarve Pro Dust Boot v4 — Precision-Fit 59mm CNC Dust Shoe | Magnetic Quick-Release","description":"\u003cp\u003e\u003cstrong\u003eMost dust boots are made for 65mm spindles. Your XCarve Pro runs 59mm — and that gap costs you suction, stability, and clean cuts.\u003c\/strong\u003e This boot is built specifically for the XCarve Pro 2x2 and 4x4, with a true 59mm opening that fits like it was made for your machine. Because it was.\u003c\/p\u003e\n\n\u003ch3\u003e📦 What's Included — Yes, the Brush Comes With It\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003eDust boot body\u003c\/strong\u003e — 59mm screw-clamp spindle mount, assembled and ready to install\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eBrush skirt, already fitted to the boot\u003c\/strong\u003e — 3\" (76.2mm) USA-made nylon, full-ring style\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eHose adapter in your size\u003c\/strong\u003e — tell us your hose at checkout, no extra charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou do not need to buy a brush separately.\u003c\/strong\u003e Every boot ships with a full brush installed and ready to cut. The brushes listed in our store are optional spares — or a \u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003esplit-style skirt\u003c\/a\u003e if you'd rather run that.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy XCarve Pro owners love it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 Precision 59mm fit\u003c\/strong\u003e — eliminates the wobble, air leaks, and suction loss you get with generic 65mm boots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic quick-release\u003c\/strong\u003e — strong neodymium magnets hold the brush skirt firm during cuts; pops off in seconds for bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Brush included\u003c\/strong\u003e — 3\" USA-made nylon, trimmable to any length with scissors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 4\" dust hose port\u003c\/strong\u003e — optimized airflow path for maximum chip capture; adapters available for all hose sizes from 1.25\" to 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 Small-batch, US-made\u003c\/strong\u003e — high-strength PETG polymer, nylon bristles, rare earth magnets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔀 Split-skirt compatible\u003c\/strong\u003e — ships with the full brush; drop in a split skirt to flip open for tool changes without removing the boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003e\nSpindle fit: 59mm Inventables spindle\u003cbr\u003e\nCompatible: XCarve Pro 2x2 and XCarve Pro 4x4\u003cbr\u003e\nHose port: 2.5\" OD (adapters available)\u003cbr\u003e\nBrush length: 3\" (76.2mm)\u003cbr\u003e\nMaterials: PETG, Nylon, Neodymium magnets\u003c\/p\u003e\n\n\u003cp\u003eNeed a different hose size or spacer plates for longer end mills? Reach out — we're happy to configure it for your setup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eDesigned by a CNC maker who got tired of generic boots that didn't fit right. Built to the spec your machine actually needs.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🔀 Full Brush vs. Split Brush\u003c\/h3\u003e\n\u003cp\u003eBoth are the same 3\" USA-made nylon bristle on the same magnetic mount. The difference is whether the ring of bristles is continuous or divided in two.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eFull Brush\u003c\/th\u003e\n\u003cth\u003eSplit Brush\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShape\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne continuous ring of bristles all the way around\u003c\/td\u003e\n\u003ctd\u003eThe same ring, divided into two halves that part in the middle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeal \u0026amp; suction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBest possible — no break anywhere in the bristles\u003c\/td\u003e\n\u003ctd\u003eExcellent — a thin seam where the halves meet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChanging a bit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePull the whole skirt off the magnets (about two seconds), change the bit, snap it back\u003c\/td\u003e\n\u003ctd\u003ePart the two halves and reach straight in — the skirt never leaves the boot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBest for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLong production runs on one bit, maximum dust capture, sheet goods\u003c\/td\u003e\n\u003ctd\u003eFrequent tool changes, V-carving, multi-bit projects, lots of Z-zeroing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOn this boot\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e✅ Ships installed\u003c\/td\u003e\n\u003ctd\u003eOptional — \u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eadd a split skirt\u003c\/a\u003e any time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🛒 Complete Your XCarve Pro Setup\u003c\/h3\u003e\n\u003cp\u003eOptional extras — your boot already arrives complete with brush and adapter. Most XCarve Pro owners add at least one of these over time:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhy You Need It\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eSpare Brush — Full or Split\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOptional spare (one already comes on your boot). Also how you switch to the split style. Drop-in, no tools.\u003c\/td\u003e\n\u003ctd\u003e$27.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-brush-by-the-foot\"\u003eBrush by the Foot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA-made nylon bristle — trim to any length for your exact cut depth. Great for cutting thick stock.\u003c\/td\u003e\n\u003ctd\u003efrom $10.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark\"\u003eBrush Spacers — ½\" \u0026amp; 1\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCutting deep pockets or using long V-bits? Spacers lower the brush for a better seal on deeper passes.\u003c\/td\u003e\n\u003ctd\u003e$22.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-shoe-adapters-for-pixels-to-prototype-dust-boot\"\u003eHose Adapters — 1.25\" to 4\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExtra sizes beyond the one already included with your boot. Quick-connect.\u003c\/td\u003e\n\u003ctd\u003efrom $7.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector\"\u003eDust Hose Support Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeep your dust hose from dragging across the work area. Overhead EMT carriage follows the gantry.\u003c\/td\u003e\n\u003ctd\u003e$46.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eIs the brush included with the dust boot?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes. Every P2P dust boot ships with a 3\" (76.2mm) USA-made nylon brush skirt already installed on it — you do not buy the brush separately. The brushes listed in our store are optional spares and replacements for when yours wears down or gets trimmed too short.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat's the difference between a full brush and a split brush?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eA \u003cstrong\u003efull\u003c\/strong\u003e brush is one continuous ring of bristles — the best seal and the strongest suction, ideal for long runs on a single bit. A \u003cstrong\u003esplit\u003c\/strong\u003e brush is that same ring divided into two halves, so you can part it and reach the bit without pulling the skirt off the boot — handy if you change tools constantly. This boot ships with the full brush; a split skirt drops onto the same magnets any time.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDoes this dust boot fit the XCarve Pro 2x2 and 4x4?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes — it's purpose-built for both. The true 59mm opening matches the Inventables 59mm spindle exactly, eliminating the air gaps and suction loss you get with generic 65mm boots.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat spindle diameter does it fit?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe 59mm Inventables spindle used on the XCarve Pro. It is not compatible with 65mm (Makita), 69mm, or 80mm spindles — we make separate boots for those. Unsure? Measure the outer diameter of the spindle body just above the collet.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow does the magnetic quick-release work?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe brush skirt attaches via neodymium magnets in both halves. They hold the skirt firmly during cuts; to change a bit, pull the skirt straight down — it detaches in one motion with no tools. Press it back up until the magnets seat.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat hose size does it accept?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe hose port is 2.5\" OD, and one adapter in your size is included at no extra cost — just tell us at checkout. We also sell quick-connect adapters separately for 1.25\", 1.5\", 2.5\", and 4\" hoses if you need a second size, so it works with standard shop vacs, dust deputies, and larger collectors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWill it clear my end mills and V-bits?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe standard 3\" (76.2mm) brush clears most 1\/4\" and 1\/8\" upcut spirals, V-bits, and surfacing bits. For longer tooling, add a 1\/2\" or 1\" brush spacer to lower the skirt and keep a good seal.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow do I install it?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eClamp it around the spindle body with the integrated split-collar mount: loosen the two M4 screws, slide the boot onto the 59mm spindle at your preferred height, then snug the screws. No drilling or modification — typically under five minutes.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eCan I replace the brush skirt when it wears out?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes. Replacement skirts are available separately in Full and Split configurations. The Split version installs without removing the boot. You never need to replace the whole boot — just the skirt.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Pixels to Prototype","offers":[{"title":"Default Title","offer_id":48751870476584,"sku":"DB4-XCP-59MM","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/XCarve_Pro_59mm_Dust_Boot_-_Photo_01.png?v=1777566056"},{"product_id":"acrylic-base-for-ryobi-router-one-cordless-p601-pcl424b-trim-router-pixels-to-prototype-ridgid-r2401-r86044","title":"Ryobi P601 Router Base Plate — 6\" × 6\" Acrylic | Fits P601 PCL424B Ridgid R2401","description":"\u003cp\u003e\u003cstrong\u003eThe stock base plate on your Ryobi P601 is too small, too flimsy, and blocks your sightlines at the worst moment.\u003c\/strong\u003e This 6\" × 6\" clear acrylic upgrade gives you a stable, visible, guide-bushing-ready platform that actually lets you do precision work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy this plate is worth it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e👁️ Full visibility\u003c\/strong\u003e — 1\/4\" clear acrylic so you always see exactly where your bit meets the wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e📐 6\" × 6\" footprint\u003c\/strong\u003e — dramatically more stable than the stock base, especially on narrow stock or edge routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 Guide bushing counterbore\u003c\/strong\u003e — pre-machined to accept standard guide bushings right out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔩 Precision-drilled holes\u003c\/strong\u003e — drop-in replacement, no drilling or modification needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 CNC-cut in the USA\u003c\/strong\u003e — made to order by Pixels to Prototype\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible routers:\u003c\/strong\u003e Ryobi P601 ONE+ · Ryobi PCL424B · Ridgid R2401 · Ridgid R86044 · Ryobi R18TR2\u003c\/p\u003e\n\u003cp\u003e💡 Pairs perfectly with the P2P Quick Mount Router Base for fast, tool-free router swaps between plates. Available separately in the store.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA small upgrade that makes every routing task cleaner, safer, and more precise.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"Default Title","offer_id":48751872835880,"sku":"RP-P601","price":24.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/6x6in_Router_Plate.jpg?v=1756044007"},{"product_id":"wen-planer-4-dust-port-upgrade-improved-chip-removal-pixels-to-prototype-wen-6552t-wen-6550t-6552-6550-craftsman-cmew320","title":"Benchtop Planer 4\" Dust Port Upgrade — WEN 6552T 6550T 6552 6550 | Craftsman CMEW320 | Grizzly G0940","description":"\u003cp\u003e\u003cstrong\u003eThe OEM dust port on your benchtop planer was designed by someone who's never actually used one.\u003c\/strong\u003e It clogs constantly, can't handle real chip volume, and fights every shop vac you throw at it. This 4\" dust port upgrade replaces it entirely — direct fit, massive airflow improvement, no hacks required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy this upgrade actually matters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 True 4\" dust collector connection\u003c\/strong\u003e — finally run your planer with a proper dust collector instead of fighting the OEM port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🛠️ Direct replacement\u003c\/strong\u003e — drops in where the OEM port was, no modifications to your machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🗑️ Ends the clogging\u003c\/strong\u003e — larger port diameter means chips clear faster and buildup stops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Two adapter options\u003c\/strong\u003e — standard 4\" dust hose or DustRight adapter for Rockler\/Woodcraft systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible planers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWEN 6552T, 6550T, 6552, 6550\u003c\/strong\u003e — direct replacement for the OEM WEN planer dust port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCraftsman CMEW320\u003c\/strong\u003e — bolts on in place of the stock Craftsman planer dust chute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrizzly G0940\u003c\/strong\u003e — fits the Grizzly benchtop planer's dust port mount for a true 4\" dust collection connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your adapter:\u003c\/strong\u003e\u003cbr\u003e• \u003cstrong\u003e4\" Dust Hose\u003c\/strong\u003e — fits standard 4\" dust collector hose (most common)\u003cbr\u003e• \u003cstrong\u003e4\" DustRight Adapter\u003c\/strong\u003e — fits Rockler DustRight flex hose system\u003c\/p\u003e\n\u003cp\u003e💡 Already running a shop vac instead of a dust collector? The 4\" adapter works with most dust collector hoses and many shop vac fittings with a reducer. Reach out if you're unsure about fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my planer?\u003c\/strong\u003e If you own a WEN 6552T, 6550T, 6552, or 6550, a Craftsman CMEW320, or a Grizzly G0940, yes — these machines share the same dust port mounting, so the upgrade installs the same way on all of them. Not sure about a different model? Message us with your planer model number and we'll confirm before you buy.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA simple upgrade that makes a dramatic difference in dust control. Your lungs and your floor will both thank you.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype LLC","offers":[{"title":"4in Hose","offer_id":48751874703656,"sku":"DA-WEN-4IN","price":45.99,"currency_code":"USD","in_stock":true},{"title":"4in Dust Rite Adapter","offer_id":48751874736424,"sku":"DA-WEN-DR","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.4566744896_3m1t.jpg?v=1756043084"},{"product_id":"dust-boot-brush-by-the-foot","title":"CNC Dust Boot Brush — By the Foot | 0.5mm \u0026 0.25mm Nylon | USA-Made","description":"\u003cp\u003e\u003cstrong\u003eWhen your dust boot brush wears down or gets trimmed too short, you shouldn't have to replace the whole boot.\u003c\/strong\u003e This is the same custom USA-made nylon brush used on every P2P dust boot — sold by the foot so you can restock exactly what you need, cut it to length, and get back to work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat makes this brush worth stocking:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 Custom-made in the USA\u003c\/strong\u003e — same high-quality nylon bristles shipped with every P2P boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e📏 Sold by the foot\u003c\/strong\u003e — buy what you need, cut to your exact length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Two filament sizes\u003c\/strong\u003e — 0.5mm standard (firmer, better for most CNC work) and 0.25mm (softer, great for delicate materials)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔧 Universal fit\u003c\/strong\u003e — works with all Pixels to Prototype dust boots including v2, v3, v4, Onefinity Elite, XCarve Pro, and Petesquared\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003e\nBacking width: ~5.7mm (0.22\")\u003cbr\u003e\nBacking height: ~6.9mm (0.27\")\u003cbr\u003e\nTotal brush length (bristle tip to backing top): ~83mm (3.27\")\u003cbr\u003e\nMaterial: Nylon bristles, nylon backing\u003c\/p\u003e\n\n\u003cp\u003e💡 \u003cstrong\u003ePro tip:\u003c\/strong\u003e Keep one full-length and one trimmed short. Switch between them depending on your tooling length and you'll never have to stop a job for a tool change again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe same brush. The same quality. Just more of it, when you need it.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🥾 Need a Boot to Put It On?\u003c\/h3\u003e\n\u003cp\u003eThis brush fits the full P2P lineup. If you're shopping for brush material, here's the boot that belongs on your machine — each one ships with a brush already included:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs\"\u003eCNC Dust Boot v4\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal fit — 59mm to 100mm spindles. X-Carve, Shapeoko, OpenBuilds, Workbee, Lead CNC, DIY builds, and most CNCs. The most versatile boot in the lineup, and the one this brush was originally designed for.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/onefinity-elite-80mm-dust-boot-pixels-to-prototype\"\u003eOnefinity Elite Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePurpose-built 80mm fit for the Onefinity Elite. If you're on an Onefinity, this is your boot — and this brush is your consumable.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/xcarve-pro-dust-boot-pixels-to-prototype-59mm\"\u003eXCarve Pro Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision 59mm fit for the XCarve Pro 2x2 and 4x4. Runs the same brush system — trim to length for your cut depth.\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/petesquared-dust-boot\"\u003ePetesquared CNC Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortex-style design, 40mm to 90mm, 4\" hose. A maker community favorite — fully built and ready to ship, brush included.\u003c\/td\u003e\n\u003ctd\u003efrom $145.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"0.5mm (Standard) Filament","offer_id":48889081299240,"sku":"DBB-FT-050","price":10.0,"currency_code":"USD","in_stock":true},{"title":"0.25mm Filament","offer_id":48889081332008,"sku":"DBB-FT-025","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/ThinnervsThickerBristle.jpg?v=1720576119"},{"product_id":"dewalt-dcs781-zero-clearance-insert","title":"DeWalt DCS781 Miter Saw Zero Clearance Insert — Hardwood | Walnut, Cherry \u0026 More","description":"\u003cp\u003e\u003cstrong\u003eThe DCS781 is DeWalt's flagship cordless miter saw — it deserves better than a plastic kerf plate.\u003c\/strong\u003e This hardwood zero clearance insert replaces the factory throat plate with a precision-fit piece that closes the blade gap, eliminates tearout, and holds flat without flexing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy woodworkers upgrade to hardwood inserts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 Zero tearout\u003c\/strong\u003e — full blade support right to the cut edge; no more underside splintering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🪵 Real hardwood\u003c\/strong\u003e — Walnut, Cherry, or Ash\/Oak\/Maple; flat, stable, and won't warp like plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Kerf cut on your saw\u003c\/strong\u003e — your blade cuts the slot for a perfect fit to your exact setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔁 Made to order\u003c\/strong\u003e — fresh and flat when it arrives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible saws:\u003c\/strong\u003e DeWalt DCS781\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWood options:\u003c\/strong\u003e\u003cbr\u003e\n🟤 \u003cstrong\u003eWalnut\u003c\/strong\u003e — rich dark grain\u003cbr\u003e\n🍒 \u003cstrong\u003eCherry\u003c\/strong\u003e — warm reddish-brown tone\u003cbr\u003e\n🌿 \u003cstrong\u003eAsh \/ Oak \/ Maple\u003c\/strong\u003e — tight grain, light color, extremely hard-wearing\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eHandcrafted in small batches. Flat, precise, and ready to install.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🪚 Also Running a Table Saw or Another Miter Saw?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eInsert\u003c\/th\u003e\n\u003cth\u003eCompatible Saws\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws779-miter-saw-zero-clearance-insert-pixels-to-prototype-woodworking-dhs790t2-dhs790at2-dhs790at2-dhs790ab-type-20-type-22\"\u003eDeWalt DWS779 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS779 — Standard, Type 20 \u0026amp; Type 22\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws780-miter-saw-zero-clearance-insert-pixels-to-prototype\"\u003eDeWalt DWS780 \/ DWS779 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS780 \u0026amp; DWS779\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dw715-miter-saw-zero-clearance-insert-pixels-to-prototype-woodworking-dw703-dw704-dw705-dw706-dw716\"\u003eDeWalt DW715 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDW715, DW703, DW704, DW705, DW706, DW716\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-dws715-miter-saw-zero-clearance-insert-hardwood\"\u003eDeWalt DWS715 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWS715 12\" single-bevel miter saw\u003c\/td\u003e\n\u003ctd\u003efrom $28.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/zero-clearance-insert-for-kobalt-10-miter-saw-sm2516lw-pixels-to-prototype-multiple-hardwood-options\"\u003eKobalt SM2516LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM2516LW 10\" miter saw — Lowe's Item #857241\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/kobalt-sm2518lw-miter-saw-zero-clearance-insert-hardwood\"\u003eKobalt SM2518LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM2518LW 10\" sliding miter saw — Lowe's Item #5034336\u003c\/td\u003e\n\u003ctd\u003efrom $26.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/kobalt-sm3017lw-miter-saw-zero-clearance-insert-hardwood\"\u003eKobalt SM3017LW ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKobalt SM3017LW 12\" sliding miter saw — Lowe's Item #1413795\u003c\/td\u003e\n\u003ctd\u003efrom $24.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/makita-ls1019-zero-clearance-insert-pixels-to-prototype-multiple-wood-options\"\u003eMakita LS1019 ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMakita LS1019 dual-bevel sliding miter saw\u003c\/td\u003e\n\u003ctd\u003efrom $27.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-table-saw-dwe7491-zero-clearance-insert-multiple-hardwood-options-pixels-to-prototype\"\u003eDeWalt DWE7491 Table Saw ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWE7491, DWE7491RS, DWE7492, DWE7480, DWE7499, DWE790X\u003c\/td\u003e\n\u003ctd\u003efrom $27.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dewalt-table-saw-dwe7485-zero-clearance-insert-multiple-hardwood-options-pixels-to-prototype\"\u003eDeWalt DWE7485 Table Saw ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDWE7485, DWE7485WS\u003c\/td\u003e\n\u003ctd\u003efrom $27.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/hardwood-bosch-table-saw-zero-clearance-insert-ts1005-4000-4100-series-pixels-to-prototype\"\u003eBosch Table Saw ZCI\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBosch TS1005, 4000 \u0026amp; 4100 series\u003c\/td\u003e\n\u003ctd\u003efrom $27.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e👉 \u003cstrong\u003e\u003ca href=\"\/blogs\/makers-journal\/what-is-a-zero-clearance-insert\"\u003eRead: Why Every Woodworker Needs a Zero Clearance Insert →\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pixels to Prototype LLC","offers":[{"title":"Ash\/Oak\/Maple \/ None","offer_id":49990918045992,"sku":"ZCI-DCS781-ASH","price":24.75,"currency_code":"USD","in_stock":true},{"title":"Cherry \/ None","offer_id":49990918078760,"sku":"ZCI-DCS781-CHY","price":26.75,"currency_code":"USD","in_stock":true},{"title":"Walnut \/ None","offer_id":49990918111528,"sku":"ZCI-DCS781-WAL","price":26.75,"currency_code":"USD","in_stock":true},{"title":"Ash\/Oak\/Maple \/ Add Custom Text +$8","offer_id":52327630635304,"sku":"ZCI-DCS781-ASH-ENG","price":32.75,"currency_code":"USD","in_stock":true},{"title":"Cherry \/ Add Custom Text +$8","offer_id":52327630668072,"sku":"ZCI-DCS781-CHY-ENG","price":34.75,"currency_code":"USD","in_stock":true},{"title":"Walnut \/ Add Custom Text +$8","offer_id":52327630700840,"sku":"ZCI-DCS781-WAL-ENG","price":34.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/DeWaltMiterSawDCS781X160V-Model.png?v=1743351164"}],"url":"https:\/\/pixelstoprototype.com\/collections\/best-sellers.oembed","provider":"PixelsToPrototype.com","version":"1.0","type":"link"}