{"title":"CNC Dust Boots \u0026 Dust Shoes","description":"\u003cp\u003ePurpose-built CNC dust boots and dust shoes for serious makers. Pixels to Prototype dust boots feature magnetic quick-release, tool-change-ready design, and a precise fit for spindle sizes from 40mm to 100mm. Compatible with Onefinity, X-Carve Pro, Shapeoko, Workbee, Lead CNC, and more. Made in the USA.\u003c\/p\u003e","products":[{"product_id":"spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3","title":"P2P CNC Dust Boot Replacement Brush — Full \u0026 Split | Fits All P2P Boots","description":"\u003cp\u003e\u003cstrong\u003eTrimmed your brush too short? Worn it down after a big job? Don't replace the whole boot — just swap the brush.\u003c\/strong\u003e This is the exact same replacement brush used on all P2P dust boots, available in full and split styles to match your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy keep a spare on hand:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Trim one short, keep one long\u003c\/strong\u003e — switch between them for different tooling lengths without missing a beat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic snap-on attachment\u003c\/strong\u003e — swaps in seconds, no tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 USA-made nylon bristles\u003c\/strong\u003e — same quality as what ships with every new P2P boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔁 Full or Split\u003c\/strong\u003e — Full for standard setups, Split for hinged\/split boots that allow faster tool changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All Pixels to Prototype dust boots — v2, v3, Onefinity Elite, XCarve Pro, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA $25 spare brush is a lot cheaper than a ruined job.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🥾 Need a Boot to Go With It?\u003c\/h3\u003e\n\u003cp\u003eIf you're replacing a worn-out brush, it might be time to check whether your boot is due for an upgrade too. Here's the full P2P dust boot lineup — each one ships with a brush included:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs\"\u003eCNC Dust Boot v3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal fit — 59mm to 100mm spindles. Works with X-Carve, Shapeoko, OpenBuilds, Lead CNC, Workbee, DIY builds, and most CNCs in between.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/onefinity-elite-80mm-dust-boot-pixels-to-prototype\"\u003eOnefinity Elite Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePurpose-built for the Onefinity Elite's 80mm spindle. True precision fit — not a generic 80mm boot.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/xcarve-pro-dust-boot-pixels-to-prototype-59mm\"\u003eXCarve Pro Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision 59mm fit for the XCarve Pro 2x2 and 4x4. Generic 65mm boots don't seal on this machine — this one does.\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/petesquared-dust-boot\"\u003ePetesquared CNC Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortex-style design with a 4\" hose connection. Available in 40mm to 90mm. A maker community favorite, now fully built and ready to ship.\u003c\/td\u003e\n\u003ctd\u003efrom $145.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"Full","offer_id":48751853994280,"sku":"14001","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Split","offer_id":48751854027048,"sku":"14002","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.2764509450_knvv.jpg?v=1767532950"},{"product_id":"spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark","title":"Dust Boot Brush Spacers for P2P v3 CNC Dust Boots — 1\/2\" \u0026 1\" | Pixels to Prototype","description":"\u003cp\u003e\u003cstrong\u003eNeed more brush reach? The P2P Spacer gives your dust boot the extra extension it needs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your tooling runs long or your workpiece setup demands more clearance, the Pixels to Prototype Brush Spacer drops right into your v3 dust boot for instant extra brush depth — no modifications required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy you might need one:\u003c\/strong\u003e\u003cbr\u003e\n📏 \u003cstrong\u003eExtended brush reach\u003c\/strong\u003e — adds 1\/2\" or 1\" of additional extension below the boot body\u003cbr\u003e\n🔧 \u003cstrong\u003eDrop-in fit\u003c\/strong\u003e — designed specifically for P2P v3 dust boots, installs in seconds\u003cbr\u003e\n🔁 \u003cstrong\u003eStack them\u003c\/strong\u003e — use both sizes together for up to 1.5\" of total extension\u003cbr\u003e\n🎯 \u003cstrong\u003eCustom setups\u003c\/strong\u003e — ideal for longer tooling, thicker spoilboards, or raised workholding\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAvailable sizes:\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003e1\/2\" (12.7mm)\u003c\/strong\u003e — for moderate extension needs\u003cbr\u003e\n\u003cstrong\u003e1\" (25.4mm)\u003c\/strong\u003e — for maximum brush reach\u003c\/p\u003e\n\n\u003cp\u003e💡 \u003cstrong\u003ePlease include your boot info in the order notes\u003c\/strong\u003e so we can confirm the right fit for your specific setup.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with all Pixels to Prototype v3 dust boots. Questions? Reach out — we're here to help you dial in the perfect configuration.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🥾 Don't Have a Boot Yet?\u003c\/h3\u003e\n\u003cp\u003eSpacers work best when your boot is already dialed in. If you're still running a generic or ill-fitting boot, upgrading first will make a bigger difference than any spacer. Here's what fits your machine:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs\"\u003eCNC Dust Boot v3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal fit — 59mm to 100mm. X-Carve, Shapeoko, OpenBuilds, Workbee, Lead CNC, DIY builds, and most other CNCs. This is the boot these spacers are designed for.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/onefinity-elite-80mm-dust-boot-pixels-to-prototype\"\u003eOnefinity Elite Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePurpose-built 80mm fit for the Onefinity Elite. If you're on an Onefinity, this is the boot to pair your spacers with.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/xcarve-pro-dust-boot-pixels-to-prototype-59mm\"\u003eXCarve Pro Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision 59mm fit for the XCarve Pro 2x2 and 4x4. Pairs well with spacers for deep-pocket jobs and long V-bit work.\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/petesquared-dust-boot\"\u003ePetesquared CNC Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortex-style, 40mm to 90mm, 4\" hose. A community-favorite design — fully built and ready to ship.\u003c\/td\u003e\n\u003ctd\u003efrom $145.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"1\/2\" (12.7mm) Spacer","offer_id":51313553768744,"sku":"14010","price":22.99,"currency_code":"USD","in_stock":true},{"title":"1\" (25.4mm) Spacer","offer_id":51313554129192,"sku":"14011","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.5304355525_656d.jpg?v=1718624439"},{"product_id":"dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs","title":"CNC Dust Boot v4 — 59mm to 100mm | Magnetic, Tool-Change Ready | P2P","description":"\u003cp\u003e\u003cstrong\u003eYour CNC deserves a dust boot that actually stays put.\u003c\/strong\u003e The P2P Dust Boot v3 is engineered from the ground up for real-world CNC use — no mid-job dislodging, no fumbling for tool changes, no adapter drama. Just clean cuts and a clean shop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy makers choose the  Pixel to Prototype v4:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔩 Screw clamp mount\u003c\/strong\u003e — locks firmly to your spindle with zero wobble, even on aggressive passes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic brush + anti-dislodge tabs\u003c\/strong\u003e — stays put when things get hairy, snaps off in seconds when you need it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ 3\" USA-made nylon brush\u003c\/strong\u003e — trim it to any length with scissors; spare brushes in the store\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔀 Split brush design\u003c\/strong\u003e — flip open for instant tool changes without removing the boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Quick-connect hose adapter\u003c\/strong\u003e — disconnect your dust hose in seconds; default is 4\" but adapters for all sizes available at no extra cost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎨 Multiple colors\u003c\/strong\u003e — default black; contact us for custom requests\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible spindle sizes:\u003c\/strong\u003e\u003cbr\u003e59mm (XCarve Pro) · 62mm · 65mm (Makita \/ Carbide3D) · 70mm (DeWalt DWP611) · 75mm · 76mm (Phantom SCV44) · 80mm · 82mm · 85mm · 88.9mm (Bosch 1617) · 90mm · 100mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e X-Carve, Onefinity, Shapeoko, OpenBuilds, Workbee, Lead CNC, Stepcraft, EZ Router, DIY builds — and most CNCs in between. Have a weird machine? Reach out. We've made custom boots for dozens of setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDust hose adapters included\u003c\/strong\u003e — just tell us your hose size at checkout. Available in 1.25\" OD, 1.5\" ID, 1.75\" OD, 2.25\" OD, 2.5\" OD, 3\" OD, and custom.\u003c\/p\u003e\n\u003cp\u003e⚠️ The 3\" brush may need trimming for shorter tooling. We recommend keeping a spare so you've always got a long and a short option ready.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMade by CNC makers, for CNC makers — in small batches, with real attention to detail.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e📐 Which Size Do I Need?\u003c\/h3\u003e\n\u003cp\u003eThe size refers to the \u003cstrong\u003eouter diameter of your router or spindle body\u003c\/strong\u003e — not the collet, not the bit, not the collet nut. Measure around the cylindrical body of the motor itself. Here's a quick reference for the most common machines:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eRouter \/ Spindle\u003c\/th\u003e\n\u003cth\u003eCommon Machines\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e59mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXCarve Pro router\u003c\/td\u003e\n\u003ctd\u003eX-Carve Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e62mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVarious compact spindles\u003c\/td\u003e\n\u003ctd\u003eDIY builds, some imported spindles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e65mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMakita RT0701 \/ RT0700, Carbide3D router\u003c\/td\u003e\n\u003ctd\u003eShapeoko, Nomad, many DIY CNCs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e70mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeWalt DWP611\u003c\/td\u003e\n\u003ctd\u003eX-Carve (original), OpenBuilds, Workbee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e75mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVarious mid-size spindles\u003c\/td\u003e\n\u003ctd\u003eDIY builds, Stepcraft, EZ Router\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e76mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom SCV44 (older models)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC (pre-S series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e80mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMost 800W–2.2kW water\/air-cooled spindles\u003c\/td\u003e\n\u003ctd\u003eOnefinity (standard spindle), Lead CNC, many DIY builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e82mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSome 2.2kW spindles, select imports\u003c\/td\u003e\n\u003ctd\u003eDIY builds — measure to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e85mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom SCV44 (S series \u0026amp; newer)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC S series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e88.9mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBosch 1617 \/ 1618 series\u003c\/td\u003e\n\u003ctd\u003eOpenBuilds, custom router tables, DIY CNCs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e90mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhantom S series (select configs)\u003c\/td\u003e\n\u003ctd\u003ePhantom CNC S series — verify your model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e100mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLarge format spindles (3kW+)\u003c\/td\u003e\n\u003ctd\u003eHeavy-duty DIY and industrial builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow to measure:\u003c\/strong\u003e Wrap a soft tape measure or a piece of string around the widest part of your spindle body (not the mount, not the collet nut). That circumference divided by π (3.14159) gives you the diameter. Round to the nearest size above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStill not sure?\u003c\/strong\u003e Drop your router or spindle model in the contact form or send us a message — we'll point you to the right size in minutes. We'd rather take 30 seconds to help you get it right than have you waiting on a return.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e🛒 Complete Your Setup\u003c\/h3\u003e\n\u003cp\u003eMost customers grab one or two of these alongside their v3 — they're the consumables and accessories that keep your boot performing at its best.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhy You Need It\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eReplacement Brush — Full \u0026amp; Split\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBrushes wear down over time. Keep a spare so you're never stuck mid-project. Available in full and split styles.\u003c\/td\u003e\n\u003ctd\u003e$24.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-brush-by-the-foot\"\u003eDust Boot Brush by the Foot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA-made nylon bristle in standard (0.5mm) or fine (0.25mm) filament. Cut to any length you need — great for custom heights or replacing a section.\u003c\/td\u003e\n\u003ctd\u003efrom $10.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark\"\u003eBrush Spacers — ½\" \u0026amp; 1\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRunning longer tooling or cutting tall stock? Spacers drop the brush skirt lower for better seal and suction on deeper cuts.\u003c\/td\u003e\n\u003ctd\u003e$22.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-shoe-adapters-for-pixels-to-prototype-dust-boot\"\u003eHose Adapters — 1.25\" to 4\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eQuick-connect compatible adapters for every common shop vac and dust collector hose size. If your hose size isn't covered in checkout, grab one here.\u003c\/td\u003e\n\u003ctd\u003efrom $7.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector\"\u003eDust Hose Support Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStop fighting a flopping 4\" hose. This overhead EMT mount keeps your hose off the work area and out of the way on every pass.\u003c\/td\u003e\n\u003ctd\u003e$46.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"59mm XCarve Pro","offer_id":48751857926440,"sku":"10001","price":124.99,"currency_code":"USD","in_stock":true},{"title":"62mm","offer_id":49643298062632,"sku":"10002","price":124.99,"currency_code":"USD","in_stock":true},{"title":"65mm Makita\/Spindle","offer_id":48751857991976,"sku":"10003","price":124.99,"currency_code":"USD","in_stock":true},{"title":"70mm DeWalt 611","offer_id":48751858057512,"sku":"10004","price":124.99,"currency_code":"USD","in_stock":true},{"title":"75mm Spindle","offer_id":48751858123048,"sku":"10005","price":124.99,"currency_code":"USD","in_stock":true},{"title":"76mm Old SCV44","offer_id":48751858450728,"sku":"10006","price":124.99,"currency_code":"USD","in_stock":true},{"title":"80mm Spindle","offer_id":48751858188584,"sku":"10007","price":124.99,"currency_code":"USD","in_stock":true},{"title":"82mm","offer_id":50491921596712,"sku":"10008","price":124.99,"currency_code":"USD","in_stock":true},{"title":"85mm SCV44 and S Ser","offer_id":48751858516264,"sku":"10009","price":124.99,"currency_code":"USD","in_stock":true},{"title":"88.9mm Bosch 1617","offer_id":48751858254120,"sku":"10010","price":124.99,"currency_code":"USD","in_stock":true},{"title":"90mm Phantom S Ser.","offer_id":48751858319656,"sku":"10011","price":124.99,"currency_code":"USD","in_stock":true},{"title":"100mm Spindle","offer_id":48751858385192,"sku":"10012","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.4719858601_9o1n.jpg?v=1718624455"},{"product_id":"dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector","title":"CNC Dust Hose Support Kit — EMT Conduit Overhead Mount | 4\", 2.5\" \u0026 1.25\" Hose","description":"\u003cp\u003e\u003cstrong\u003eA 4\" dust hose flopping around your CNC isn't just annoying — it's a liability.\u003c\/strong\u003e It snags on clamps, drags across your workpiece, and fights your machine every move it makes. This EMT conduit overhead support system keeps your hose up, out of the way, and following your gantry smoothly on every job.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🏗️ Mounts to standard 3\/4\" or 1\" EMT conduit\u003c\/strong\u003e — run your conduit above your CNC table; kit includes everything to mount and ride it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎢 608-bearing carriage\u003c\/strong\u003e — rolls smoothly back and forth as your gantry moves; no binding, no drag\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 Supports 4\", 2.5\", and 1.25\" hose\u003c\/strong\u003e — pick your hose size at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🛠️ Modular system\u003c\/strong\u003e — pair with the P2P Hose Carriage (sold separately) for a complete overhead dust management setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🖨️ High-strength PETG\u003c\/strong\u003e — built to handle the heat and vibration of real shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEMT sizes:\u003c\/strong\u003e 3\/4\" or 1\"\u003cbr\u003e\n\u003cstrong\u003eHose sizes:\u003c\/strong\u003e 4\" · 2.5\" · 1.25\"\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e EMT conduit not included — available at any hardware store\u003c\/p\u003e\n\u003cp\u003e💡 Run the conduit across the back of your CNC table and angle it forward slightly — the hose will naturally trail behind the gantry and stay clear of your workpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOne of the best quality-of-life upgrades you can make to any CNC setup. Your back and your workpieces will both thank you.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"3\/4\" EMT \/ 4\"","offer_id":48751859761448,"sku":"70001","price":46.5,"currency_code":"USD","in_stock":true},{"title":"3\/4\" EMT \/ 2.5\"","offer_id":48751859794216,"sku":"70002","price":46.5,"currency_code":"USD","in_stock":true},{"title":"3\/4\" EMT \/ 1.25\"","offer_id":48751859826984,"sku":"70003","price":46.5,"currency_code":"USD","in_stock":true},{"title":"1\" EMT \/ 4\"","offer_id":48751859859752,"sku":"70004","price":46.5,"currency_code":"USD","in_stock":true},{"title":"1\" EMT \/ 2.5\"","offer_id":48751859892520,"sku":"70005","price":46.5,"currency_code":"USD","in_stock":true},{"title":"1\" EMT \/ 1.25\"","offer_id":48751859925288,"sku":"70006","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.4617481939_knnh.jpg?v=1767395493"},{"product_id":"onefinity-elite-80mm-dust-boot-pixels-to-prototype","title":"Onefinity Elite CNC v4 Dust Boot — 80mm | Magnetic Quick-Release | Tool-Change Ready","description":"\u003cp\u003e\u003cstrong\u003eThe Onefinity Elite deserves a dust boot that was actually designed for it — not a generic boot shoved onto an 80mm spindle.\u003c\/strong\u003e This is a purpose-built dust shoe for the Onefinity Elite CNC with a precision 80mm spindle fit, magnetic quick-release brush, and tool-change-ready split brush design.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 True 80mm Onefinity Elite fit\u003c\/strong\u003e — screw-clamp mount with zero wobble, no shimming or shimmy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic brush + anti-dislodge tabs\u003c\/strong\u003e — holds firm through deep passes, snaps off in seconds for bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔀 Full or split brush\u003c\/strong\u003e — split design lets you flip open for instant tool changes without removing the boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Your hose size, your choice\u003c\/strong\u003e — pick from 4\", 2.5\", 1.75\" OD (Onefinity standard), 1.5\", or 1.25\" ID at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ USA-made 3\" nylon brush\u003c\/strong\u003e — trimmable to any length; replacement brushes available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible machine:\u003c\/strong\u003e Onefinity Elite (all sizes)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose size options:\u003c\/strong\u003e 4\" · 2.5\" OD · 2.25\" OD · 1.75\" OD (Onefinity standard) · 1.5\" ID · 1.25\" ID\u003c\/p\u003e\n\u003cp\u003e💡 Not sure which hose size you need? The 1.75\" OD adapter fits the standard Onefinity Elite flex hose. Reach out if you're unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt by CNC makers who run Onefinity machines. We know what this machine needs.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🛒 Complete Your Onefinity Setup\u003c\/h3\u003e\n\u003cp\u003eRunning a clean shop on your Onefinity Elite takes more than just the boot. These are the accessories Onefinity Elite owners reach for most:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhy You Need It\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eReplacement Brush — Full \u0026amp; Split\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe same brush that ships with your boot. Keep one on the shelf so a worn-down skirt never stops a job. Pick full or split to match your boot style.\u003c\/td\u003e\n\u003ctd\u003e$24.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-brush-by-the-foot\"\u003eDust Boot Brush by the Foot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA-made nylon bristle — standard 0.5mm or fine 0.25mm filament. Cut to any length. Great for dialing in a custom brush height for your Onefinity table setup.\u003c\/td\u003e\n\u003ctd\u003efrom $10.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark\"\u003eBrush Spacers — ½\" \u0026amp; 1\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUsing longer end mills or surfacing bits on your Onefinity Elite? Spacers extend your brush reach for better suction and seal on deeper cuts.\u003c\/td\u003e\n\u003ctd\u003e$22.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-shoe-adapters-for-pixels-to-prototype-dust-boot\"\u003eHose Adapters — 1.25\" to 4\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIf you're running a shop vac or dust collector with a hose size not covered at checkout, grab the right adapter here. Quick-connect compatible.\u003c\/td\u003e\n\u003ctd\u003efrom $7.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector\"\u003eDust Hose Support Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe Onefinity's open gantry design makes hose management tricky. This overhead EMT mount keeps your 4\" hose out of the cutting area on every pass.\u003c\/td\u003e\n\u003ctd\u003e$46.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"Full","offer_id":51313483219240,"sku":"12001","price":124.99,"currency_code":"USD","in_stock":true},{"title":"Split","offer_id":51313483415848,"sku":"12007","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.5010227594_850g.jpg?v=1718624531"},{"product_id":"cnc-z-axis-dust-hose-mount-for-4-dust-hose-nema23-lead-cnc","title":"CNC Z-Axis Dust Hose Mount — 4\" Hose | NEMA23 Rail | Workbee \u0026 Lead CNC","description":"\u003cp\u003e\u003cstrong\u003eOn rail-style CNCs, your 4\" dust hose has one job: get in the way.\u003c\/strong\u003e It droops, it pinches, and on machines like the Workbee and Lead CNC it gets caught between the Z-axis and the frame. This simple Z-axis mount keeps the hose controlled and out of trouble — permanently.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 NEMA23 rail mount\u003c\/strong\u003e — bolts directly to the Z-axis rail on Workbee, Lead CNC, and similar OpenBuilds-style machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 Supports 4\" dust hose\u003c\/strong\u003e — keeps the hose elevated and following the Z-axis movement instead of fighting it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚡ Simple install\u003c\/strong\u003e — no drilling, no modifications; uses existing NEMA23 mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🖨️ High-strength PETG\u003c\/strong\u003e — handles vibration and heat from real CNC use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible machines:\u003c\/strong\u003e Workbee CNC · Lead CNC · OpenBuilds-style NEMA23 rail CNCs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose size:\u003c\/strong\u003e 4\" dust collector hose\u003c\/p\u003e\n\u003cp\u003e💡 Running a different hose size? Reach out — we can usually accommodate custom requests.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA $9 fix for one of the most annoying problems in CNC dust management.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"Default Title","offer_id":48751866741032,"sku":"20101","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.4617754553_na7g.jpg?v=1756045977"},{"product_id":"xcarve-pro-dust-boot-pixels-to-prototype-59mm","title":"XCarve Pro Dust Boot v4 — Precision-Fit 59mm CNC Dust Shoe | Magnetic Quick-Release","description":"\u003cp\u003e\u003cstrong\u003eMost dust boots are made for 65mm spindles. Your XCarve Pro runs 59mm — and that gap costs you suction, stability, and clean cuts.\u003c\/strong\u003e This boot is built specifically for the XCarve Pro 2x2 and 4x4, with a true 59mm opening that fits like it was made for your machine. Because it was.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy XCarve Pro owners love it:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🎯 Precision 59mm fit\u003c\/strong\u003e — eliminates the wobble, air leaks, and suction loss you get with generic 65mm boots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 Magnetic quick-release\u003c\/strong\u003e — strong neodymium magnets hold the brush skirt firm during cuts; pops off in seconds for bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e💨 4\" dust hose port\u003c\/strong\u003e — optimized airflow path for maximum chip capture; adapters available for all hose sizes from 1.25\" to 5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 Small-batch, US-made\u003c\/strong\u003e — high-strength PETG polymer, nylon bristles, rare earth magnets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔁 Replaceable brush skirt\u003c\/strong\u003e — spare brushes available separately so you're never down for long\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003e\nSpindle fit: 59mm Inventables spindle\u003cbr\u003e\nCompatible: XCarve Pro 2x2 and XCarve Pro 4x4\u003cbr\u003e\nHose port: 2.5\" OD (adapters available)\u003cbr\u003e\nBrush length: 3\" (76.2mm)\u003cbr\u003e\nMaterials: PETG, Nylon, Neodymium magnets\u003c\/p\u003e\n\n\u003cp\u003eNeed a different hose size or spacer plates for longer end mills? Reach out — we're happy to configure it for your setup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eDesigned by a CNC maker who got tired of generic boots that didn't fit right. Built to the spec your machine actually needs.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🛒 Complete Your XCarve Pro Setup\u003c\/h3\u003e\n\u003cp\u003eThe XCarve Pro is a serious machine — these accessories make sure your dust collection keeps up with it. Most XCarve Pro owners add at least one of these at checkout:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003cth\u003eWhy You Need It\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spare-brush-for-all-p2p-dust-boots-pixels-to-prototype-standard-boot-shark-onefinity-v3\"\u003eReplacement Brush — Full \u0026amp; Split\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThe XCarve Pro runs hard. Keep a spare brush on hand so you're not scrambling when the skirt wears down. Drop-in replacement, no tools required.\u003c\/td\u003e\n\u003ctd\u003e$24.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-brush-by-the-foot\"\u003eDust Boot Brush by the Foot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA-made nylon bristle — trim to any length for your exact cut depth. Great for XCarve Pro users cutting thick stock who need extra brush reach.\u003c\/td\u003e\n\u003ctd\u003efrom $10.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/spacers-for-p2p-v3-dust-boots-1in-1-2in-pixels-to-prototype-shark-onefinity-xcarve-cnc4newbie-shark\"\u003eBrush Spacers — ½\" \u0026amp; 1\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCutting deep pockets or using long V-bits on your XCarve Pro? Spacers lower the brush for better seal on deeper passes without compromising visibility.\u003c\/td\u003e\n\u003ctd\u003e$22.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-shoe-adapters-for-pixels-to-prototype-dust-boot\"\u003eHose Adapters — 1.25\" to 4\"\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRunning a shop vac or dust collector with a non-standard hose? These quick-connect adapters bridge your hose to the boot's 2.5\" OD port in seconds.\u003c\/td\u003e\n\u003ctd\u003efrom $7.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-hose-support-package-for-emt-conduit-cnc-3-4-1-emt-4-2-5-1-25-hose-pixels-to-prototype-dust-shoe-xcarve-dust-collector\"\u003eDust Hose Support Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKeep your dust hose from dragging across your XCarve Pro's work area. This overhead EMT-mounted carriage follows the gantry and keeps tension off the boot.\u003c\/td\u003e\n\u003ctd\u003e$46.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does this dust boot fit the XCarve Pro 2x2 and 4x4?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes — this boot is purpose-built for both the XCarve Pro 2x2 and XCarve Pro 4x4. It uses a true 59mm opening that matches the Inventables 59mm spindle exactly, eliminating the air gaps and suction loss you get with generic 65mm boots.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What spindle diameter does this boot fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This boot is designed for the 59mm Inventables spindle used on the XCarve Pro. It is not compatible with 65mm (Makita), 69mm, or 80mm spindles — we make separate boots for those. If you are unsure of your spindle size, measure the outer diameter of the spindle body just above the collet.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does the magnetic quick-release work?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The brush skirt attaches to the main body via neodymium rare-earth magnets embedded in both halves. During cutting the magnets hold the skirt firmly against the work surface. To change a bit, you simply pull the skirt straight down — it detaches in one motion with no tools, latches, or screws. Reattach by pressing it back up until you feel the magnets seat.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What vacuum or dust collector hose size does it accept?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The hose port has a 2.5-inch OD (outer diameter). We sell quick-connect hose adapters separately that cover 1.25-inch, 1.5-inch, 2.5-inch, and 4-inch hoses, so it works with standard shop vacs, dust deputies, and larger shop dust collectors.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will it clear my end mills and V-bits?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The standard brush length is 3 inches (76.2mm), which clears most 1\/4-inch and 1\/8-inch upcut spirals, V-bits, and surfacing bits used on the XCarve Pro. For longer tooling — such as long-reach end mills or bowl-cutting bits — we recommend adding a 1\/2-inch or 1-inch brush spacer.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I install it on my XCarve Pro?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The boot clamps around the spindle body using the integrated split-collar mount. Loosen the two M4 screws, slide the boot up onto the 59mm spindle to your preferred height, then snug the screws to lock it in place. No drilling or modification to your XCarve Pro is required. Total install time is typically under five minutes.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the boot made from?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The main body is CNC-milled from high-strength PETG polymer, which is rigid, chip-resistant, and dimensionally stable. The brush skirt uses nylon bristles that flex with the work surface for a consistent seal. Retention is handled by neodymium rare-earth magnets. All components are sourced and assembled in the United States in small batches.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I replace the brush skirt when it wears out?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Replacement brush skirts are available separately in both Full and Split configurations. The Split version makes installation easier if you don't want to remove the boot from your spindle. You don't need to replace the entire boot when the bristles wear — just the skirt.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it work with the XCarve Pro dust collection hose support arm?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The 2.5-inch hose port is compatible with the Inventables overhead hose support arm. We also sell our own EMT-mounted dust hose support kit that keeps the hose off the work surface and follows the gantry — a popular upgrade for XCarve Pro 4x4 users running large sheets.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How is this different from the generic dust boot that came with my XCarve Pro?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The stock XCarve Pro dust boot is a 65mm generic design with an adapter sleeve to fit the 59mm spindle — this creates a slight wobble and air gap that reduces suction efficiency. The P2P boot uses a native 59mm collar with no adapter sleeve, giving you a tighter fit, better airflow, and less vibration transfer to the spindle during cuts.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003chr\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDoes this dust boot fit the XCarve Pro 2x2 and 4x4?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes — this boot is purpose-built for both the XCarve Pro 2x2 and XCarve Pro 4x4. It uses a true 59mm opening that matches the Inventables 59mm spindle exactly, eliminating the air gaps and suction loss you get with generic 65mm boots.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat spindle diameter does this boot fit?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThis boot is designed for the 59mm Inventables spindle used on the XCarve Pro. It is not compatible with 65mm (Makita), 69mm, or 80mm spindles — we make separate boots for those. If you are unsure of your spindle size, measure the outer diameter of the spindle body just above the collet.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow does the magnetic quick-release work?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe brush skirt attaches to the main body via neodymium rare-earth magnets embedded in both halves. During cutting the magnets hold the skirt firmly against the work surface. To change a bit, simply pull the skirt straight down — it detaches in one motion with no tools, latches, or screws. Reattach by pressing it back up until you feel the magnets seat.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat vacuum or dust collector hose size does it accept?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe hose port has a 2.5-inch OD (outer diameter). We sell quick-connect hose adapters separately covering 1.25-inch, 1.5-inch, 2.5-inch, and 4-inch hoses — so it works with standard shop vacs, dust deputies, and larger shop dust collectors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWill it clear my end mills and V-bits?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe standard brush length is 3 inches (76.2mm), which clears most 1\/4-inch and 1\/8-inch upcut spirals, V-bits, and surfacing bits used on the XCarve Pro. For longer tooling — such as long-reach end mills or bowl-cutting bits — add a 1\/2-inch or 1-inch brush spacer to lower the skirt and maintain a good seal.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow do I install it on my XCarve Pro?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe boot clamps around the spindle body using the integrated split-collar mount. Loosen the two M4 screws, slide the boot up onto the 59mm spindle to your preferred height, then snug the screws to lock it in place. No drilling or modification to your XCarve Pro is required. Total install time is typically under five minutes.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the boot made from?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe main body is CNC-milled from high-strength PETG polymer, which is rigid, chip-resistant, and dimensionally stable. The brush uses nylon bristles that flex with the work surface for a consistent seal. Retention is handled by neodymium rare-earth magnets. All components are sourced and assembled in the United States in small batches.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eCan I replace the brush skirt when it wears out?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes. Replacement brush skirts are available separately in both Full and Split configurations. The Split version makes installation easier if you don't want to remove the boot from your spindle. You never need to replace the entire boot — just the skirt.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDoes it work with the XCarve Pro dust collection hose support arm?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eYes. The 2.5-inch hose port is compatible with the Inventables overhead hose support arm. We also sell our own EMT-mounted dust hose support kit that keeps the hose off the work surface and follows the gantry — a popular upgrade for XCarve Pro 4x4 users running large sheets.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow is this different from the generic dust boot that came with my XCarve Pro?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003cp\u003eThe stock XCarve Pro dust boot is a 65mm generic design with an adapter sleeve to fit the 59mm spindle — this creates wobble and an air gap that reduces suction. The P2P boot uses a native 59mm collar with no adapter sleeve, giving you a tighter fit, better airflow, and less vibration transfer. It also uses stronger neodymium magnets than the stock release mechanism.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Pixels to Prototype","offers":[{"title":"Default Title","offer_id":48751870476584,"sku":"13001","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/XCarve_Pro_59mm_Dust_Boot_-_Photo_01.png?v=1777566056"},{"product_id":"dust-shoe-adapters-for-pixels-to-prototype-dust-boot","title":"P2P CNC Dust Boot Hose Adapters — 1.25\" to 4\" | Fits All P2P Dust Boots","description":"\u003cp\u003e\u003cstrong\u003eYour P2P dust boot hose port is a quick-connect — but what if your dust hose is a different size?\u003c\/strong\u003e These adapters bridge the gap between your P2P dust boot and whatever dust collection system you're running, from a tiny 1.25\" shop vac hose all the way up to a full 4\" dust collector.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 Works with all P2P dust boots\u003c\/strong\u003e — v2, v3, Elite, and more; same quick-connect system across the lineup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e📏 Multiple sizes available\u003c\/strong\u003e — 1.25\" OD, 1.75\" OD, 2.25\" OD, 2.5\" OD, 4\" OD, 5\" OD, and custom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚡ Snap-fit connection\u003c\/strong\u003e — clicks into the boot port in seconds; no tools, no hose clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🖨️ High-strength PETG\u003c\/strong\u003e — handles continuous airflow and shop vibration without cracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable sizes:\u003c\/strong\u003e\u003cbr\u003e\n• \u003cstrong\u003e1.25\" OD\u003c\/strong\u003e — for small shop vac hoses\u003cbr\u003e\n• \u003cstrong\u003e1.75\" OD\u003c\/strong\u003e — mid-size flex hose (Onefinity standard)\u003cbr\u003e\n• \u003cstrong\u003e2.25\" OD\u003c\/strong\u003e — larger flex hose\u003cbr\u003e\n• \u003cstrong\u003e2.5\" OD\u003c\/strong\u003e — common shop vac and larger flex hose\u003cbr\u003e\n• \u003cstrong\u003e4\" OD\u003c\/strong\u003e — full dust collector hose\u003cbr\u003e\n• \u003cstrong\u003e5\" OD\u003c\/strong\u003e — large-format dust collectors\u003cbr\u003e\n• \u003cstrong\u003eCustom (\u0026lt;4\")\u003c\/strong\u003e — reach out with your hose size and we'll sort it\u003c\/p\u003e\n\u003cp\u003e💡 Not sure which one you need? Measure the OD of your existing hose, or reach out with your setup and we'll point you to the right one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe right adapter for every hose. Pick yours and keep cutting.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🥾 Need a Boot to Connect It To?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are quick-connect compatible with the full P2P dust boot lineup. If you're picking up an adapter, here's which boot fits your machine:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs\"\u003eCNC Dust Boot v3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal fit — 59mm to 100mm spindles. Works with X-Carve, Shapeoko, OpenBuilds, Workbee, Lead CNC, DIY builds, and most CNCs. Default hose port is 4\" — grab a smaller adapter here if needed.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/onefinity-elite-80mm-dust-boot-pixels-to-prototype\"\u003eOnefinity Elite Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePurpose-built 80mm fit for the Onefinity Elite. Standard Onefinity flex hose is 1.75\" OD — grab that adapter if you're running the stock hose.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/xcarve-pro-dust-boot-pixels-to-prototype-59mm\"\u003eXCarve Pro Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision 59mm fit for the XCarve Pro 2x2 and 4x4. Hose port is 2.5\" OD — adapters available here for any other size.\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/petesquared-dust-boot\"\u003ePetesquared CNC Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortex-style design with native 4\" hose connection. 40mm to 90mm spindle sizes. Fully built and ready to ship.\u003c\/td\u003e\n\u003ctd\u003efrom $145.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype LLC","offers":[{"title":"1.25in OD","offer_id":48751880306984,"sku":"11001","price":7.0,"currency_code":"USD","in_stock":true},{"title":"1.75in OD","offer_id":48751880339752,"sku":"11002","price":7.0,"currency_code":"USD","in_stock":true},{"title":"2.25in OD","offer_id":48751880372520,"sku":"11003","price":7.0,"currency_code":"USD","in_stock":true},{"title":"2.5in OD","offer_id":48751880405288,"sku":"11004","price":7.0,"currency_code":"USD","in_stock":true},{"title":"4in OD","offer_id":48751880438056,"sku":"11005","price":7.0,"currency_code":"USD","in_stock":true},{"title":"Custom (\u003c4in)","offer_id":48751880470824,"sku":"11006","price":7.0,"currency_code":"USD","in_stock":true},{"title":"5in OD","offer_id":50519266591016,"sku":"11007","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/il_fullxfull.4569109910_l10y.jpg?v=1767388386"},{"product_id":"dust-boot-brush-by-the-foot","title":"CNC Dust Boot Brush — By the Foot | 0.5mm \u0026 0.25mm Nylon | USA-Made","description":"\u003cp\u003e\u003cstrong\u003eWhen your dust boot brush wears down or gets trimmed too short, you shouldn't have to replace the whole boot.\u003c\/strong\u003e This is the same custom USA-made nylon brush used on every P2P dust boot — sold by the foot so you can restock exactly what you need, cut it to length, and get back to work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat makes this brush worth stocking:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🇺🇸 Custom-made in the USA\u003c\/strong\u003e — same high-quality nylon bristles shipped with every P2P boot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e📏 Sold by the foot\u003c\/strong\u003e — buy what you need, cut to your exact length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e✂️ Two filament sizes\u003c\/strong\u003e — 0.5mm standard (firmer, better for most CNC work) and 0.25mm (softer, great for delicate materials)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔧 Universal fit\u003c\/strong\u003e — works with all Pixels to Prototype dust boots including v2, v3, Onefinity Elite, XCarve Pro, and Petesquared\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003cbr\u003e\nBacking width: ~5.7mm (0.22\")\u003cbr\u003e\nBacking height: ~6.9mm (0.27\")\u003cbr\u003e\nTotal brush length (bristle tip to backing top): ~83mm (3.27\")\u003cbr\u003e\nMaterial: Nylon bristles, nylon backing\u003c\/p\u003e\n\n\u003cp\u003e💡 \u003cstrong\u003ePro tip:\u003c\/strong\u003e Keep one full-length and one trimmed short. Switch between them depending on your tooling length and you'll never have to stop a job for a tool change again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe same brush. The same quality. Just more of it, when you need it.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e🥾 Need a Boot to Put It On?\u003c\/h3\u003e\n\u003cp\u003eThis brush fits the full P2P lineup. If you're shopping for brush material, here's the boot that belongs on your machine — each one ships with a brush already included:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBoot\u003c\/th\u003e\n\u003cth\u003eBest For\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs\"\u003eCNC Dust Boot v3\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal fit — 59mm to 100mm spindles. X-Carve, Shapeoko, OpenBuilds, Workbee, Lead CNC, DIY builds, and most CNCs. The most versatile boot in the lineup, and the one this brush was originally designed for.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/onefinity-elite-80mm-dust-boot-pixels-to-prototype\"\u003eOnefinity Elite Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePurpose-built 80mm fit for the Onefinity Elite. If you're on an Onefinity, this is your boot — and this brush is your consumable.\u003c\/td\u003e\n\u003ctd\u003e$124.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/xcarve-pro-dust-boot-pixels-to-prototype-59mm\"\u003eXCarve Pro Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision 59mm fit for the XCarve Pro 2x2 and 4x4. Runs the same brush system — trim to length for your cut depth.\u003c\/td\u003e\n\u003ctd\u003e$109.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003ca href=\"\/products\/petesquared-dust-boot\"\u003ePetesquared CNC Dust Boot\u003c\/a\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVortex-style design, 40mm to 90mm, 4\" hose. A maker community favorite — fully built and ready to ship, brush included.\u003c\/td\u003e\n\u003ctd\u003efrom $145.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Pixels to Prototype","offers":[{"title":"0.5mm (Standard) Filament","offer_id":48889081299240,"sku":"14020","price":10.0,"currency_code":"USD","in_stock":true},{"title":"0.25mm Filament","offer_id":48889081332008,"sku":"14021","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/ThinnervsThickerBristle.jpg?v=1720576119"},{"product_id":"petesquared-dust-boot","title":"Petesquared CNC Dust Boot — 40mm to 90mm | Vortex Design | 4\" Hose | Built \u0026 Ready","description":"\u003cp\u003e\u003cstrong\u003eThe Petesquared Dust Boot is one of the most refined CNC dust boot designs in the maker community — and now you can get it fully built and ready to install.\u003c\/strong\u003e Listed with collaboration and permission from Pete at Petesquared23.com, this boot features a custom vortex design and an insane magnet setup that holds like it means business.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat sets the Petesquared apart:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e🧲 8 magnets per side\u003c\/strong\u003e — that's 16 total; this split brush isn't going anywhere mid-job\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🪥 Custom 0.5mm nylon brush\u003c\/strong\u003e — specifically designed for CNC dust collection, not repurposed brush strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🌀 Custom vortex design\u003c\/strong\u003e — engineered by Pete for better chip capture and airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e🔌 4\" hose connector\u003c\/strong\u003e — standard large-bore connection for maximum CFM; other sizes available on request\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e📏 Wide size range\u003c\/strong\u003e — 40mm through 90mm in 5mm increments to fit a huge variety of spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible spindle sizes:\u003c\/strong\u003e\u003cbr\u003e\n40mm · 45mm · 50mm · 55mm · 60mm · 65mm · 70mm · 75mm · 80mm · 85mm · 90mm\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA few things to know about this version:\u003c\/strong\u003e\u003cbr\u003e\n• Uses 10×3mm magnets (vs. Pete's standard 10×4mm)\u003cbr\u003e\n• Hose adapters are integrated into the vortex piece — not field-swappable like Pete's design\u003cbr\u003e\n• The 4\" adapter is standard; reach out for other hose sizes\u003cbr\u003e\n• Colors available on request\u003c\/p\u003e\n\n\u003cp\u003eLooking for the digital design files or Pete's hardware kit? Visit \u003ca href=\"https:\/\/petesquared23.com\" target=\"_blank\"\u003ePetesquared23.com\u003c\/a\u003e directly to support Pete with affiliate credit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eA community-beloved design, built and fulfilled by Pixels to Prototype with Pete's blessing.\u003c\/em\u003e\u003c\/p\u003e","brand":"Pixels to Prototype","offers":[{"title":"40mm","offer_id":49413761302824,"sku":"30036","price":145.99,"currency_code":"USD","in_stock":true},{"title":"45mm","offer_id":49413761335592,"sku":"30037","price":145.99,"currency_code":"USD","in_stock":true},{"title":"50mm","offer_id":49413761368360,"sku":"30038","price":145.99,"currency_code":"USD","in_stock":true},{"title":"55mm","offer_id":49413761401128,"sku":"30039","price":145.99,"currency_code":"USD","in_stock":true},{"title":"60mm","offer_id":49413761433896,"sku":"30040","price":145.99,"currency_code":"USD","in_stock":true},{"title":"65mm","offer_id":49413761466664,"sku":"30030","price":145.99,"currency_code":"USD","in_stock":true},{"title":"70mm","offer_id":49413761499432,"sku":"30031","price":145.99,"currency_code":"USD","in_stock":true},{"title":"75mm","offer_id":49413761532200,"sku":"30032","price":145.99,"currency_code":"USD","in_stock":true},{"title":"80mm","offer_id":49413761564968,"sku":"30033","price":145.99,"currency_code":"USD","in_stock":true},{"title":"85mm","offer_id":49413761597736,"sku":"30034","price":145.99,"currency_code":"USD","in_stock":true},{"title":"90mm","offer_id":49413761630504,"sku":"30035","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/8148\/2536\/files\/Petesquared23DustBoot-Listing01.jpg?v=1729215483"}],"url":"https:\/\/pixelstoprototype.com\/collections\/cnc-dust-boots-dust-shoes.oembed","provider":"PixelsToPrototype.com","version":"1.0","type":"link"}