Pixels to Prototype
Overhead Tool & Dust Hose Balancer Kit — 1" EMT Rail | Spring Balancer + Hose Strap up to 4"
Overhead Tool & Dust Hose Balancer Kit — 1" EMT Rail | Spring Balancer + Hose Strap up to 4"
Couldn't load pickup availability
Get your dust hose off the floor and out of your way — then pull it right where you need it. This overhead balancer kit turns a stick of 1" EMT conduit into a rolling ceiling rail. A spring balancer hangs from the carriage and holds your hose (or a light tool) up high, lets you pull it down to work, and lifts it back out of the way when you let go.
- 🎢 Rolls the length of the rail — the carriage glides along the conduit so the hose follows you across the bench or the CNC table
- 🪝 Spring balancer pulls down and retracts — adjustable tension takes the weight of the hose so it doesn't drag on your work
- 💨 Strap fits hose up to 4" — ideal for 2.5" shop vac hose; handles 4" dust collector hose on short runs
- 🏠 Uses cheap, easy-to-find conduit — cut 1" EMT to whatever length fits your shop
- 🖨️ High-strength PETG printed parts — built for real shop use
📦 What's Included
- ✅ (2) End supports — mount to your ceiling and hold each end of the conduit
- ✅ (1) Carriage for 1" EMT — rides the conduit and carries the balancer
- ✅ (1) Spring balancer — adjustable, retractable, 1.1–3.3 lb load range
- ✅ (1) Hose strap — buckle strap that wraps hose up to 4" and clips to the balancer
Not included: 1" EMT conduit (pick up a stick at any big box hardware store and cut to length) and mounting screws for the end supports
Hose size: 2.5" and smaller; 4" on short runs
Great for: CNC dust collection, sanding stations, shop vac hose, or hanging a light tool over your bench
⚠️ About 4" hose: the balancer is rated for 1.1–3.3 lb. Keep the length of 4" hose it carries short so the weight stays in that range.
💡 How we use it in our shop: one rail holds the 4" dust collector hose over the CNC, and another holds a 2.5" hose over the sanding bench — pull it down when sanding, let it go and it's back up out of the way.
Need more support on a longer run? Extra carriages are sold individually.
Designed and made by Pixels to Prototype in Lafayette, Indiana.