Sienci LongMill & AltMill Dust Boot — Magnetic Quick-Release | P2P
Handmade in Indiana | In-stock orders ship in 1–2 business days | Brush and hose adapter included
Sienci owners run two very different setups: the stock Makita router on a LongMill, or an 80mm spindle on an AltMill or upgraded LongMill. The right dust boot depends on which one is on your Z-axis. Both of ours clamp directly to the router or spindle body with a screw clamp, and both use a magnetic brush skirt that comes off by hand for a bit change.
Pick your Sienci setup:
80mm Spindle — Sienci Dust Boot → Stock Makita — Universal v4 (65mm) →
Which Boot Fits My LongMill or AltMill?
| Machine | Router / Spindle | Size | Recommended Boot |
|---|---|---|---|
| AltMill MK2 — 2×4, 4×4 & 4×8 | Sienci 2.2kW ER20 spindle | 80mm | Sienci AltMill & LongMill Dust Boot |
| AltMill (original) | 80mm spindle | 80mm | Sienci AltMill & LongMill Dust Boot |
| LongMill MK2 / MK2.5 | 80mm spindle upgrade | 80mm | Sienci AltMill & LongMill Dust Boot |
| LongMill MK2 / MK2.5 | Stock Makita RT0701 router | 65mm | Universal v4 Boot — 65mm |
| AltMill with a smaller aftermarket spindle | Shimmed into the 80mm mount | Measure | Universal v4 Boot in your spindle's diameter |
| Not sure? | Measure the outer diameter of the motor body | — | Send us a photo and we'll confirm |
Quick check: wrap a string around the widest part of the motor housing (not the collet or collet nut) and divide the length by 3.14. Around 80mm means the Sienci boot. Around 65mm means you're still on the Makita.
Why Sienci Owners Choose P2P
- Screw-clamp fit on the spindle body — no shims, no zip ties, and the boot moves with your Z-axis
- Magnetic brush skirt with anti-dislodge tabs — holds through the cut, lifts off by hand when you need to see the bit
- Full or split brush on the 80mm Sienci boot — the split skirt parts in the middle so you can change a bit without taking it off
- Brush included — 3" USA-made nylon, already fitted to the boot; trim it with scissors to match your tooling
- Hose adapter included — 4" port, with an adapter from 1.25" to 4" at no extra cost; tell us your hose size at checkout
Already Have the Dust Shoe From Your AltMill Spindle Kit?
Sienci's AltMill spindle kits come with an 80mm dust shoe, and plenty of owners run it happily. Owners who switch usually do it for faster bit changes, to run their own hose size on a dust collector or shop vac, or to adjust skirt height with a trimmed brush or a spacer for surfacing and long end mills.
Complete Your Sienci Dust Collection Setup
| Product | Why Sienci Owners Get This | Price |
|---|---|---|
| Sienci AltMill & LongMill Dust Boot — 80mm | True 80mm clamp for the AltMill and spindle-upgraded LongMill. Full or split brush. | $124.99 |
| Universal v4 Dust Boot — 65mm | For a LongMill on the stock Makita RT0701 router. | $124.99 |
| Spare Brush — Full or Split | Optional spare (one already comes on your boot). Keep one long and one trimmed short. | $27.99 |
| Brush Spacers — 1/2" & 1" | Drops the skirt lower for surfacing a spoilboard or running long end mills. | $24.99 |
| Dust Hose Support Kit | Overhead EMT mount keeps a 4" hose off the spoilboard, which matters most across a 4×8 AltMill. | $46.50 |
Common Questions from LongMill and AltMill Owners
Does this fit the Sienci AltMill 2.2kW spindle?
Yes. The spindle in Sienci's AltMill 2.2kW ER20 kit has an 80mm body, which is what the Sienci boot clamps to. It fits every AltMill MK2 table size because the boot mounts to the spindle, not the frame.
Will it fit my LongMill with the stock Makita router?
The 80mm Sienci boot will not. The Makita RT0701 body is 65mm, so order the Universal v4 boot and select 65mm.
Is the brush included?
Yes. Every P2P dust boot ships with a 3" USA-made nylon brush skirt already installed. The brushes sold separately are optional spares.
What hose sizes does it work with?
The port is 4". One adapter is included at no extra charge: 2.5" OD, 2.25" OD, 1.75" OD, 1.5" ID or 1.25". Tell us your hose size at checkout.
How long does shipping take?
In-stock orders ship within 1–2 business days from our Indiana shop, with tracking.
Ready for a cleaner LongMill or AltMill?
Shop the 80mm Sienci Dust Boot → Shop Universal v4 (65mm Makita) →