X-Carve Dust Boot — X-Carve Pro & Original | Magnetic, Tool-Change Ready | P2P
X-Carve Dust Boot — Fits X-Carve Pro & Original X-Carve
★★★★★ 4.9/5 based on 516+ verified reviews | Handmade in Indiana | Ships in 1–2 Business Days | USA-Made
Whether you're running the X-Carve Pro with its 59mm router or an original X-Carve with a DeWalt DWP611, we've got the right dust boot for your machine. Both are built with magnetic quick-release, a split brush for mid-job tool changes, and a screw-clamp mount that won't walk loose during cuts. Made by hand in Indiana.
Pick your X-Carve model:
X-Carve Pro — 59mm Dedicated Boot → Original X-Carve — Universal v4 (70mm) →
Which Boot Fits My X-Carve?
| X-Carve Model | Router / Spindle | Size | Recommended Boot |
|---|---|---|---|
| X-Carve Pro | X-Carve Pro router (59mm) | 59mm | XCarve Pro v4 Dust Boot |
| Original X-Carve with DeWalt DWP611 | DeWalt DWP611 (70mm) | 70mm | Universal v4 Boot — 70mm |
| Original X-Carve with Makita RT0701 | Makita router (65mm) | 65mm | Universal v4 Boot — 65mm |
| Not sure? | Measure outer router body diameter | — | Contact us |
The X-Carve Pro Boot — Built for the 59mm Router
The X-Carve Pro uses a proprietary 59mm router body — a size most dust boot makers don't stock. The P2P XCarve Pro boot was precision-fit for that exact diameter. You won't need to shim it, force it, or compromise.
- Precision 59mm fit — designed specifically for the X-Carve Pro router, not a generic boot stretched to fit
- Magnetic quick-release brush — snaps off for tool changes in under 5 seconds
- Split brush option — fold the brush open for instant bit swaps without removing the boot
- Hose size your choice — select at checkout; 4" for dust collectors, smaller for shop vacs
Complete Your X-Carve Dust Collection Setup
| Product | Why X-Carve Owners Get This | Price |
|---|---|---|
| XCarve Pro v4 Dust Boot — 59mm | Purpose-built for X-Carve Pro. Precision 59mm fit, magnetic release, split brush. | $124.99 |
| Replacement Brush | Keep a spare so you're never stuck mid-project. | $24.99 |
| Brush Spacers — 1/2" & 1" | Running longer tooling? Spacers lower your brush for a better dust seal. | $22.99 |
| Dust Hose Support Kit | Keep your dust hose out of the cutting area on every pass. | $46.50 |
Common Questions from X-Carve Owners
Is there a dedicated boot for the X-Carve Pro?
Yes — we make a dedicated version purpose-fit for the X-Carve Pro's 59mm router body. It's not a generic boot resized to fit.
My original X-Carve came with a 611 router — which size do I order?
The DeWalt DWP611 has a 70mm outer body. Select "70mm DeWalt 611" on the Universal v4 product page — the most common size for original X-Carve builds.
Will this work with the Easel-controlled X-Carve without modifications?
Yes. The dust boot attaches to the router body, not the machine's electronics or gantry hardware. Installs in minutes with a screwdriver.
What if my X-Carve has an upgraded spindle?
No problem. The Universal v4 boot comes in 12 sizes from 59mm to 100mm. Measure your spindle's outer body diameter and select that size.
Cut clean. Stop sweeping chips every 5 minutes.
Shop X-Carve Pro Dust Boot → Shop Universal v4 (Original X-Carve) →